How to activate GPRS on E65 with vodafone prepaid

I got one great mobile Nokia E65, and I am starting to dig it. First of all I am going to activate GPRS to get full power of E65. I am using a lifelong Vodafone sim card. To activate GPRS we should do the following:

1)To activate GPRS on simcard
2)Download and save settings on your mobile phone.

To activate GPRS on simcard, send a message
ACT VL to 144

Automatically settings will be sent as SMS. Save it. But I didn't get any settings at all. So I set up it manually. To do it manually,

Go to menu->Tools->Settings->Connection->Accesspoints

Here shows available accesspoints. Probably you should make a new one named 'Vodafone live!'.To make new one,

options->New access point

Enter into new access point,then configure as shown.

Connection name : Vodafone live!
Data bearer : packet data
Access point name : portalnmms
User name : None
Prompt password : No
Password : (No change)
Authentication : Normal
Homepage : http://live.vodafone.in

Then do,

options->Advanced settings

Network type : IPv4
Phone IP address : Automatic
DNS address : Automatic
Proxy server address : 10.10.1.100
Proxy port number : 9401

To access GPRS,

menu->Web

Yes, you have done!

Note: I am residing at Kerala,India. So people residing outside Kerala, should take appropriate changes. Call 111 for any help from vodafone.

My Life: A turning point...

Sometimes, our way will be very different from the expected. Here, I am just sharing how I became inetersted in Electronics from a flare of nothing. I recognized my way when I was 13 – from a low cost book from a footpath. The book included fundamentals of electronics as well as some simple example projects. I really attracted by one project-a musical bell using a single IC UM66 and a single stage amplifier. Major attraction was it's low cost. Next morning, I went to purchase all components. I saw transistors and other components for the first time. I started assembling my first project. I had not even soldering iron or bread board to assemble. I just connected all components with some waste copper wires with bare hand. Practically the process was extremely complex for my age I think. If one wire is joined together, the other will be disconnected. A small change in the positioning was capable for the system does not work. After completing my work I verified all connections. The circuit was not much pretty – a heap of wires only. I had no any great expectations because I knew that connections were not proper. Took a silent pray and connected to a cell directly without a switch.
............The result was amazing!! . It did work. Hearing a strange music all in our home came in to my room with a pleasant smile. Even though the circuit was a simple one, that incident was a milestone in my life. If that circuit hadn’t work, the destiny may be rewritten.