mcu8051IDE can now be used in Microsoft Windows also. If you are not aware of mcu8051IDE, read my previous post: Introduction to mcu8051IDE
Download the following:
First install ActiveTcl and SDCC and then mcu8051IDE.
Then you have just completed mcu8051IDE installation in windows.
If you want to report bug, go here.
Sunday, July 4, 2010
How to activate BSNL 3G in iPhone?
Maintaining iPhone features in India is not easy because almost all mobile phone users are belong to Nokia or Sony Ericsson. So support for Apple iPhone is less. To use BSNL 3G features, you require a 3G supported mobile phone and BSNL 3G USIM. Normally to get activated in BSNL 3G, you need to send {your mobile model} to 58355:
example: NOKIA E65
to 58355
It worked for my Nokia E65. But for iPhone it is currently not possible because, they are not having the settings for Apple iPhone. I activated 3G successfully and I did what follows.
Step1: Go Settings->General->Network->Cellular Data Network
Step2: Edit under the tab - Cellular Data
APN => bsnlnet
Usename => {Left blank}
Password => {Left blank}
Step3: Go Settings->General->Network
Step4: Switch 'Enable 3G' to ON. Also switch 'Cellular Data' to ON if not.
*Note: 3G will work if you are in a 3G coverage. Else you can get connected and use internet with 2G or 2.5G. If you are not in a 3G coverage area, it is better to turn off 3G. This will save a lot of battery. If you are in a 3G coverage, and you turned on 3G on your iPhone, a '3G' symbol will be displayed on top left corner of your iPhone screen. If you are in 2G, a 'E' symbol is displayed to remind that you are in EDGE network.
Step5: You are done. Use 'Safari' to browse internet.
If you are having any problem please report. If you found any other methods, please comment about it.
example: NOKIA E65
to 58355
It worked for my Nokia E65. But for iPhone it is currently not possible because, they are not having the settings for Apple iPhone. I activated 3G successfully and I did what follows.
Step1: Go Settings->General->Network->Cellular Data Network
Step2: Edit under the tab - Cellular Data
APN => bsnlnet
Usename => {Left blank}
Password => {Left blank}
Step3: Go Settings->General->Network
Step4: Switch 'Enable 3G' to ON. Also switch 'Cellular Data' to ON if not.
*Note: 3G will work if you are in a 3G coverage. Else you can get connected and use internet with 2G or 2.5G. If you are not in a 3G coverage area, it is better to turn off 3G. This will save a lot of battery. If you are in a 3G coverage, and you turned on 3G on your iPhone, a '3G' symbol will be displayed on top left corner of your iPhone screen. If you are in 2G, a 'E' symbol is displayed to remind that you are in EDGE network.
Step5: You are done. Use 'Safari' to browse internet.
If you are having any problem please report. If you found any other methods, please comment about it.
Subscribe to:
Posts (Atom)